CDI MERCURY SWITCH BOX 2 CYLINDER
Product Code: 114-4952
1992-1995 (40 & 50HP) Force 2 Cyl. Engines.
Replaces:
18495A 2, 18495A 4, 18495A 5, 18495A 6, 18495A 8, 18495A11, 18495A13.
Disconnect the kill wire(s):
Connect a DC voltmeter between the kill wires and engine ground. Turn the ignition switch on and off several times. If, at any time, you see DC voltage on the kill wires, there is a problem with the harness or ignition switch. Battery voltage on the kill circuit will destroy most ADI type switch boxes.
WARNING!!! Due to the location of the switch box and the rectifier/regulators on some engines, use extreme caution when connecting the switch box to the stator. The RED switch box wire can be easily connected to the RED 12V wire that is supposed to go to the rectifier/regulator – This results in a burned out switch box.
Replaces:
18495A 2, 18495A 4, 18495A 5, 18495A 6, 18495A 8, 18495A11, 18495A13.
Disconnect the kill wire(s):
Connect a DC voltmeter between the kill wires and engine ground. Turn the ignition switch on and off several times. If, at any time, you see DC voltage on the kill wires, there is a problem with the harness or ignition switch. Battery voltage on the kill circuit will destroy most ADI type switch boxes.
WARNING!!! Due to the location of the switch box and the rectifier/regulators on some engines, use extreme caution when connecting the switch box to the stator. The RED switch box wire can be easily connected to the RED 12V wire that is supposed to go to the rectifier/regulator – This results in a burned out switch box.
- Quantity Available: 2